EBEX00: props Messages: 3 Entries..

I've plotted wind direction as a function of time of day for the top prop
for Tom to use in SGS.  At night, it is about 290 degrees, during the day
about 340 degrees, with some days a shift to 030 degrees in the afternoon.
The 1.7m prop data are similar, though with more scatter.

Steve S just used the alignment tool and I reset the boom alignment here about
2 min ago.  An edited version of the rserial session is appended below.  
Note the change of direction from 710 to 0, which will have to be included
in the cal_file.  Also note that this unit (#3) was supposed to have been
set up correctly in the lab, and may have a collar slippage problem.
The problem started on Aug 11 at ~19:00 local.

W:0003    129    85   710  250 00T\n\r
Q\r
Parameters \n\r
     Sample rate = 250 Hz\n\r
     Xmit rate   = 0250 samples\n\r
     Boom align  = 305  counts\n\r
     Boom angle  = 0.0 degrees\n\r
     True North  = 305  counts\n\r
     Prop Pitch  = 305  mm/rev\n\r
B\r
Q\r
Parameters \n\r
     Sample rate = 250 Hz\n\r
     Xmit rate   = 0250 samples\n\r
     Boom align  = 406  counts\n\r
     Boom angle  = 0.0 degrees\n\r
     True North  = 305  counts\n\r
     Prop Pitch  = 305  mm/rev\n\r
\r
W:0003    144    95   710  250 00V\n\r
D000\r
\r
W:0003    218   143     0  250 00r\n\r
Q\r
Parameters \n\r
     Sample rate = 250 Hz\n\r
     Xmit rate   = 0250 samples\n\r
     Boom align  = 406  counts\n\r
     Boom angle  = 0.0 degrees\n\r
     True North  = 406  counts\n\r
     Prop Pitch  = 305  mm/rev\n\r
\r

Both the T/RH and Prop profiles were torn down over the last 2 hours.
In the process, the breezecom antenna was moved, which stopped ingest
for cosmos.  I've just revived this by mxreset, but we lost 2 hours of
data.  

This is the first stage of tear-down.  By now, most of the Swiss instruments
are down, and the Dutch pulled stuff off yesterday.  The profile at s7
also is being removed.