May 20 06:06:05 --> Jorgen (chatzilla@salt.atd.ucar.edu) has joined &C130Q May 20 06:06:18 Hi Larry - do you read me? May 20 06:19:37 --> bonnie-c130 (bonnie-c13@ras50.ucar.edu) has joined &C130Q May 20 06:20:45 --> ads-c130 (ads@ras50.ucar.edu) has joined &C130Q May 20 06:21:38 Hi Larry - I get you May 20 06:34:19 Thanks, Jorgen. May 20 06:40:25 --> aulenbac (aulenbac@cgdowl.cgd.ucar.edu) has joined &C130Q May 20 06:49:40 Larry - Is all well? I want to go out for breakfast if everything is running on rails. May 20 06:50:29 about to reach NST1, wind 60 kts out of SW so could get bumpy, all well from the cockpit May 20 06:50:30 All looks very good right now. May 20 06:50:35 OK May 20 06:51:15 Niwot Tundra cam shows low broken clouds May 20 07:12:43 --> beaton (beaton@sbmac.atd.ucar.edu) has joined &C130Q May 20 07:13:18 Who's our ADS operator this morning May 20 07:13:52 Could you tell me what the XLA1 voltage reading is? Thanks May 20 07:23:10 xla1 is about -2.5 volts right now. May 20 07:40:42 --> brandon (brandon@dyn84-124.atd.ucar.edu) has joined &C130Q May 20 07:43:07 Niwot: low, broken clouds, wind speed 4.6 m/s, wind direction 176 May 20 07:43:44 --> birwin (birwin@dyn84-8.atd.ucar.edu) has joined &C130Q May 20 07:46:10 The Winds display on Bonnie is giving us problems. May 20 07:46:32 --> sburns (sburns@porter.Colorado.EDU) has joined &C130Q May 20 07:47:10 It is still running (updating) but none of the buttons respond. Any help? May 20 07:50:39 Hi Larry, I'm back. Is Bonnie up in the cockpit or where? May 20 07:50:50 I need a way to restart winds on Bonnie. May 20 07:51:07 Bonnie is the cockpit. May 20 07:53:32 restart bonnie, if you need to turn it off first, so be it May 20 07:54:55 I would need to shut down the computer. May 20 07:55:05 another way to try is request_winds bonnie (or host name) (cr) May 20 07:55:19 from hercules May 20 07:55:46 you need only shut down the lap top bonnie, not hercules as that would shut down disc win May 20 07:55:47 --> Jcowan-Jeffco (jcowan@dyn84-150.atd.ucar.edu) has joined &C130Q May 20 07:59:21 <-- ads-c130 has quit (Ping timeout) May 20 07:59:22 <-- bonnie-c130 has quit (Ping timeout) May 20 08:01:21 --> ads-c130 (ads@ras50.ucar.edu) has joined &C130Q May 20 08:01:36 --> bonnie-c130 (bonnie-c13@ras50.ucar.edu) has joined &C130Q May 20 08:04:04 I got winds restarted on Bonnie but still non-responsive. May 20 08:05:22 Larry what is non-responsive? Sorry I'm late and missed the first part of the problem. May 20 08:05:42 <-- bonnie-c130 has quit (Read error: Connection reset by peer) May 20 08:09:24 Eventually I figured out that all of Bonnie was non-respopnsive. May 20 08:09:47 I had to reboot Bonnie, all is well. May 20 08:10:08 OK - it sounds like all is OK again? May 20 08:10:19 OK May 20 08:10:26 Yes May 20 08:10:47 good job larry May 20 08:10:47 Good fix Larry. May 20 08:12:43 See, maybe you won't have to replace me with a new guy? May 20 08:13:24 No, it takes to long to train a new one up. Your stuck for the forseeable future. . May 20 08:13:58 Lucky for me! May 20 08:14:59 What's up with printing on Hercules? May 20 08:16:25 Chris did not get that fixed before he left. There is no Winds printing from any station. We don't know when it will be fixed. May 20 08:16:42 read low priority May 20 08:18:19 I did get a printout from Clyde. May 20 08:19:11 Hmm. That's interesting. I don't have an answer for you on that then. May 20 08:33:28 --> bonnie-c130 (bonnie-c13@ras50.ucar.edu) has joined &C130Q May 20 08:33:47 yeah, our understand from Chris was no printing from any winds station May 20 08:34:32 I wonder though if msybe it's just Hercules and if the other staions will still print? May 20 08:35:46 britt back on in the cockpit after rebooting laptop - all well. I just started watching the down camera images at 1 sec update. Can someone please check with Stuart to make sure this won't cause any problems? thanks May 20 08:36:51 Only Clyde prints. May 20 08:36:52 One second updates should not be a problem, even if a few computers are showing them. May 20 08:37:56 If you want to be certain, get on Clyde, go to the NetCam directory, and type ls to get a directory listing. Then do it again a few seconds later. May 20 08:38:54 Since the filenames are in the form "c130_down_date_time.jpg", you can check that more images have been written by comparing the time in the filename. May 20 08:42:41 c130, what's your next waypoint? May 20 08:49:29 we are about 15 min. off my estimated schedule, and Dave is done flask sampling, so we are aborting the second rollercoaster, now heading direct to NST5 May 20 08:54:53 How was the cloud cover over Niwot? May 20 08:55:20 stuart - did you mean clyde or the laptop in back? May 20 08:56:34 I meant the laptop on the back table, left side. I thought that was clyde. May 20 08:56:43 clouds about 800 AGL over the tower, which made the (lower) overpasses fun MCR saw a bunch of clouds but it's seeing nothing but trees and snow now May 20 08:57:10 stuart - larry checked the laptop and reports images recording fine - neat to watch from up here May 20 08:58:32 Glad you like it. I thought it might be nice to see what's directly underneath, since you can't really look down from your seat there. May 20 09:14:00 Hi Larry - can you ask Britt for an ETA at JeffCo? May 20 09:15:59 ETA is 10:30. May 20 09:16:10 Thanx May 20 09:47:02 Larry, Looks like you are heading back. Is 1030 still a good ETA? May 20 09:50:53 1025 to 1030 is my best guess May 20 09:55:54 lowell is now estimating 1015 - we sped up and caught a tailwind May 20 09:59:07 OK May 20 10:06:12 how many journalists are expected? is there an ncar media person there? if not, could you call bob or nicole? thanks 5 minutes out from pattern May 20 10:08:16 will do May 20 10:09:25 Nicole is on her way - but none of the two tv stations are here yet.. May 20 10:11:57 <-- aulenbac has quit (Quit: Leaving) May 20 10:13:32 thanks, we're down May 20 10:17:03 <-- ads-c130 has quit (Ping timeout) May 20 10:17:04 <-- bonnie-c130 has quit (Ping timeout) May 20 11:33:48 <-- beaton has quit (Quit: Leaving) May 20 12:24:36 <-- sburns has quit (Quit: Leaving)