| Name: | Somnath Baidya Roy |
|---|---|
| Affiliation: | CEE, Duke University |
| E-mail: | sbroy@duke.edu |
| Telephone: | 919-660-5581 |
| Fax: | 919-660-9219 |
| Mailing Address: | Somnath Baidya Roy Dept. of Civil and Environmental Engineering Duke University Box 90287 Hudson Hall Durham NC 27708 |
| Model name: | Regional Atmospheric Modeling System (RAMS) |
|---|---|
| Primary citations describing model formulation: | Pielke, R. A., et al., A comprehensive meteorological modeling system--RAMS, Meteorol. Atmos. Phys., 49, 69-91, 1992. Cotton W. R., et al., RAMS 2001: Current status and future directions, Meteorol. Atmos. Phys., 82, 5, 2003. |
| URL for online model information: | www.atmet.com |
| Start date of simulation: (15 May 2004) | 15 May 2004 |
| End date of simulation: (20 Sept 2004) | 30 September 2004 |
| Single continuous run?: | Yes |
| If not, describe model initialization protocol: | |
| Will you submit a single model run, multiple runs (how many), or an ensemble average of runs? (please describe) | Single |
| Hydrostatic? [yes or no]: | No |
|---|---|
| Horizontal domain: (15-45°N 125-75°W, for regional models) | 8000km x 6208km centered at [30N,100W] |
| Map projection: | Polar Stereographic Pole point: [28N,110W] |
| Horizontal resolution: | 64km x 64km |
| Vertical coordinate: | Terrain-following sigma |
| Number of vertical levels: | 30 -21.78, 23.86, 78.63, 144.36, 223.23, 317.88, 431.45, 567.75, 731.29, 927.55, 1163.06, 1445.68, 1784.81, 2191.77, 2680.13, 3266.16, 3969.39, 4813.26, 5825.92, 7046.33, 8475.81, 9987.00, 11487.00, 12987.00, 14487.00, 15987.00, 17487.00, 18987.00, 20487.00, 21987.00 |
| Description of IR and solar radiation schemes: | Full radiative transfer equation SW: 3 band approach LW: emissitivity approach |
|---|---|
| Principal reference: | Chen, C. and W. R. Cotton, A one-dimensional simulation of the stratocumulus-capped mixed layer, Bound. Layer. Meteorol., 25, 289-321, 1983. |
| Description of deep convection scheme: | Modified Kuo |
| Principal reference: | Pielke, R. A., et al., A comprehensive meteorological modeling system--RAMS, Meteorol. Atmos. Phys., 49, 69-91, 1992. |
| Description of resolved condensation scheme: | Bulk microphysical model prognoses mixing ratio and number concentration of rain, ice crystals, aggregates, graupel and hail for all resolved processes. |
| Principal reference: | Walko, R. L., et al., New RAMS cloud microphysics parameterization. Part I: the single moment scheme, Atmos. Res., 38, 29-62, 1995. Meyers, M. P.,et al., New RAMS cloud microphysics parameterization. Part II: the two-moment scheme, Atmos. Res., 45, 3-39, 1997. |
| Description of boundary layer scheme: | K-theory based mixing Horizontal: local closure Veritcal: TKE-based closure |
| Principal reference: | Smagorinsky, J., General circulations experiments with the primitive equations. Part 1: The basic experiment, Mon. Wea. Rev., 91, 99-164, 1963. Mellor, G. L. and T. Yamada, A hierarchy of turbulent closure models for planetary boundary layers, J. Atmos. Sci., 31, 1791-1806, 1974. |
| Description of land surface scheme: | Land Ecosystem-Atmosphere Feedback (LEAF-2) model prognoses energy, mass and moisture in multiple soil and snow layers, vegetation matter and canopy air. Subgrid heterogeneity is represented by up to five different vegetation types per gridcell. The effects of the individual vegetation types are aggregated weighted by their relative areal coverage. The fluxes of mass, energy and momentum from the surface to the atmosphere are calculated using surface similarity theory. |
| Principal reference: | Walko, R. L., et al., Coupled atmosphere-biophysics-hydrology model for environmental modeling, J. Appl. Meteorol., 39, 931-944, 2000. Louis, J.F., Parametric model of vertical eddy fluxes in the atmosphere, Bound. Layer Meteorol., 17, 187-202, 1979. |
| Used Xie (2005) SST fields? (Xie 2005 analyses): | No |
|---|---|
| If not, specify SST boundary condition: | Reynolds SST |
| Frequency of observed SST updates: | Updated every timestep (90s) Linearly interpolated from weekly data |
| Used CDAS2 analysis for lateral boundary conditions? (if regional model): (NOAA CDAS2) | Yes |
| If other boundary conditions, please specify: |
| Description of output format for spatial fields: (Preferred format) | GrADS binary |
|---|---|
| Description of output format for MOLTS time series:(Preferred format) | GrADS binay |
| Estimated total size in Gigabytes of model output: | 4 Gb |