| Name: | J. Craig Collier and Guang J. Zhang |
|---|---|
| Affiliation: | Center for Atmospheric Science Scripps Institution of Oceanography University of California - San Diego |
| E-mail: | craigc@fiji.ucsd.edu zhang@fiji.ucsd.edu |
| Telephone: | (858) 534-1119 |
| Fax: | (858) 534-4379 |
| Mailing Address: | 9500 Gilman Drive #0221 La Jolla, CA 92093 - 0221 |
| Model name: | NCAR Community Atmosphere Model ver. 3 (CAM3) |
|---|---|
| Primary citations describing model formulation: | "The formulation and atmospheric simulation of the Community Atmosphere Model (CAM3)" by Collins, et al. in Journal of Climate, in press, but also found http://www.ccsm.ucar.edu/publications/jclim04/Papers_JCL04.html>at http://www.ccsm.ucar.edu/publications/jclim04/Papers_JCL04.html |
| URL for online model information: | www.ccsm.ucar.edu/models/atm-cam/ |
| Start date of simulation: (15 May 2004) | 2003-09-01 |
| End date of simulation: (20 Sept 2004) | 2004-09-30 |
| Single continuous run?: | Yes |
| If not, describe model initialization protocol: | |
| Will you submit a single model run, multiple runs (how many), or an ensemble average of runs? (please describe) | single |
| Hydrostatic? [yes or no]: | No |
|---|---|
| Horizontal domain: (15-45°N 125-75°W, for regional models) | 180W to 180E, 90S to 90N |
| Map projection: | Gaussian |
| Horizontal resolution: | T42 |
| Vertical coordinate: | pure sigma coordinate at lower levels, transitioning to pure pressure coordinate at upper levels |
| Number of vertical levels: | 26 |
| Description of IR and solar radiation schemes: | IR formulation uses a broad-band model approach for apsorption by various gases. Solar formulation uses delta-eddington approximation with new treatment of cloud vertical overlap, updated parameterization for near-infrared absorption by water vapor, and inclusion of prescribed aerosol data sets. |
|---|---|
| Principal reference: | IR: Kiehl, J.T. and B.P. Briegleb, A new parameterization of the absorptance due to the 15 micron band system of carbon dioxide, J. Geophys. Res., 96, 9013-9019, 1991 and Kiehl, J.T. and V. Ramanathan, CO2 radiative parameterization used in climate models: comparison with narrow band models and with laboratory data, J. Geophys. Res., 88, 5191-5202, 1983. Solar: Briegleb, B. P., Delta-Eddington approximation for solar radiation in the NCAR Community Climate Model, J. Geophys. Res., 97, 7603-7612, 1992. |
| Description of deep convection scheme: | The scheme uses a plume ensemble approach to mass flux of heat and water vapor. It is assumed that convective scale updrafts and associated saturated downdrafts may exist whenever the atmosphere is conditionally unstable in the lower troposphere. |
| Principal reference: | Zhang, G.J. and N.A. McFarlane, Sensitivity of climate simulations to the parameterization of cumulus convection in the Canadian Climate Centre general circulation model, Atmosphere-Ocean, 33, 407-446, 1995. |
| Description of resolved condensation scheme: | Diagnosed liquid water path of CCM3 is replaced with prognostic scheme which uses evolution equations for liquid and ice phase condensate. It consists of a macroscale component that describes the exchange of water substance between condensate and the vapor phase and the associated temperature change arising from the phase change and a bulk microphysical component that controls conversion of condensate to precipitate. |
| Principal reference: | Zhang, M., et al. A modified formulation of fractional stratiform condensation rate in the NCAR community atmospheric model CAM2, J. Geophys. Res., 108 (D1), 2003. |
| Description of boundary layer scheme: | For unstable or convective conditions, transport of heat, water vaopr, or passive scalars by convective turbulence is related to the nonlocal eddy diffusivity for the quantity of interest, which itself is related to the convective velocity scale. |
| Principal reference: | local vertical diffusion (stable conditions): Boville, B.A. and C.S. Bretherton, Heating and dissipation in the NCAR community atmosphere model, J. Climate, 16, 3877-3887, 2003. non-local (unstable conditions): Holtslag, A.A.M. and C.-H. Moeng, Eddy diffusivity and countergradient transport in the convective atmospheric boundary latyer, J. Atmos. Sci., 48, 1690-1698, 1991. ABL height: Vogelezang, D.H.P., and A.A.M. Holtslag, Evaluation and model impacts of alternative boundary-layer height formulations, Boundary Layer Meteorol., 81, 245-269, 1996. |
| Description of land surface scheme: | CLM (community land model) is designed for coupling to atmospheric models, providing surface albedos, upward LW radiation, sensible heat flux, latent heat flux, water vapor flux, and zonal and meridional surface stresses, as regulated in part by ecological and hydrological processes. It runs interactively and is initiated concurrently with the atmospheric model, using climatological Sep. 1st values for land surface variables. |
| Principal reference: | Oleson, et al., Technical description of the Community Land Model (CLM), NCAR Technical Note (NCAR/TN-461+STR) available at www.cgd.ucar.edu/tss/clm/distribution/clm3.0/TechNote/CLM_Tech_Note.pdf, 2004. |
| Used Xie (2005) SST fields? (Xie 2005 analyses): | No |
|---|---|
| If not, specify SST boundary condition: | Observed mid-month SSTs as used for AMIP-style runs were obtained from the Program for Climate Model Diagnosis and Intercomparison at Lawrence Livermore National Laboratory. The values are derived from monthly averages from the ERA-40 reanalysis project. |
| Frequency of observed SST updates: | once per month |
| Used CDAS2 analysis for lateral boundary conditions? (if regional model): (NOAA CDAS2) | No |
| If other boundary conditions, please specify: | A climatological time-variant ozone mixing ratio data set, provided by NCAR, was also used as a boundary condition. |
| Description of output format for spatial fields: (Preferred format) | netCDF files containing 3-hourly-average gridded values of lat-lon fields over the domain of interest. |
|---|---|
| Description of output format for MOLTS time series:(Preferred format) | netCDF files containing 1-hourly-average values with full vertical resolution of hourly surface fluxes, humidity, T, u, v, w, Z, convective and total precipitation, cloud fraction, and radiation variables for the sounding sites. |
| Estimated total size in Gigabytes of model output: | 5 GB |