Contact Information
Name: David Lawrence
Affiliation: National Center for Atmospheric Research
E-mail: dlawren@ucar.edu
Telephone: 303 497-1384
Fax: 303 497-1348
Mailing Address: P.O. Box 3000
Boulder, CO 80307

General Information (NAMAP2 specification, if applicable)
Model name: NCAR Community Atmosphere Model (CAM3) using Finite Volume Dynamical Core and with updated Community Land Model (CLM3) hydrology
Primary citations describing model formulation: Collins et al., 2006: The Formulation and Atmospheric Simulation of the Community Atmosphere Model: CAM3, J. Clim. In press.

Dickinson et al., 2006: The Community Land Model and Its Climate Statistics as a Component of the Community Climate System Model. J.Clim,
in press.

Collins, W. D., P. J. Rasch, B. A. Boville, J. J. Hack, J. R. McCaa, D. L. Williamson,
J. T. Kiehl, B. Briegleb, C. Bitz, S.-J. Lin, M. Zhang, and Y. Dai, 2004: Description
of the NCAR Community Atmosphere Model (CAM3). Technical Report NCAR/TN-
464+STR, National Center for Atmospheric Research, Boulder, Colorado 80307-3000,
226 pp.

Oleson, K.W., Y. Dai, G. B. Bonan, M. Bosilovich, R. Dickinson, P. Dirmeyer, F. Hoffman, P. Houser, S. Levis, G.-Y. Niu, P. Thornton, M. Vertenstein, Z.-L. Yang, and X. Zeng, 2004: Technical description of the Community Land Model (CLM). Technical Report NCAR/TN-461+STR, National Center for Atmospheric Research, Boulder, CO. 80307-3000, 174 pp.

These papers can be found at
http://www.ccsm.ucar.edu/publications/jclim04/Papers_JCL04.html
and
http://www.ccsm.ucar.edu/models/ccsm3.0/

URL for online model information: www.ccsm.ucar.edu/models/ccsm3.0/
Start date of simulation: (15 May 2004)1999-01-01
5-year spin-up of soil moisture and temperature
End date of simulation: (20 Sept 2004)2004-09-30
Single continuous run?:Yes
If not, describe model initialization protocol:  
Will you submit a single model run,
multiple runs (how many), or
an ensemble average of runs?
(please describe)
Single

Dynamics/Numerics (NAMAP2 specification, if applicable)
Hydrostatic? [yes or no]: Yes
Horizontal domain: (15-45°N 125-75°W, for regional models)Model run globally, submitting only requested domain
Map projection:  
Horizontal resolution:1 deg lat x 1.25
deg long
Vertical coordinate:pure sigma coordinate at lower levels, transitioning to pure pressure coordinate at upper levels
Number of vertical levels: 26

Physics (NAMAP2 specification, if applicable)
Description of IR and solar radiation schemes: R formulation uses a broad-band model approach for apsorption by various gases. Solar formulation uses delta-eddington approximation with new treatment of cloud vertical overlap, updated parameterization for near-infrared absorption by water vapor, and inclusion of prescribed aerosol data sets.
Principal reference: R: Kiehl, J.T. and B.P. Briegleb, A new parameterization of the absorptance due to the 15 micron band system of carbon dioxide, J. Geophys. Res., 96, 9013-9019, 1991 and
Kiehl, J.T. and V. Ramanathan, CO2 radiative parameterization used in climate models: comparison with narrow band models and with laboratory data, J. Geophys. Res., 88, 5191-5202, 1983.

Solar: Briegleb, B. P., Delta-Eddington approximation for solar radiation in the NCAR Community Climate Model, J. Geophys. Res., 97, 7603-7612, 1992.
Description of deep convection scheme: The scheme is based on a plume ensemble approach where it is assumed that an ensemble of convective scale updrafts (and the associated saturated downdrafts) may exist whenever the atmosphere is conditionally unstable in the lower troposphere. The updraft ensemble is comprised of plumes sufficiently buoyant so as to penetrate the unstable layer, where all plumes have the same upward mass flux at the bottom of the convective layer. Moist convection occurs only when there is convective available potential energy (CAPE) for which parcel ascent from the sub-cloud layer acts to destroy the CAPE at an exponential rate using a specified adjustment time scale.
Principal reference: Zhang, G.J. and N.A. McFarlane, Sensitivity of climate simulations to the parameterization of cumulus convection in the Canadian Climate Centre general circulation model, Atmosphere-Ocean, 33, 407-446, 1995.
Description of resolved condensation scheme: The formulation for cloud condensate combines a representation for condensation and evaporation with a bulk microphysical parameterization closer to that used in cloud resolving models. The parameterization replaces the diagnosed liquid water path of CCM3 with evolution equations for two additional predicted variables: liquid and ice phase condensate. At one point during each time step, these are combined into a total condensate and partitioned according to temperature, but elsewhere function as independent quantities. They are affected by both resolved (e.g. advective) and unresolved (e.g. convective, turbulent) processes. Condensate can evaporate back into the environment or be converted to a precipitating form depending upon its in-cloud value and the forcing by other atmospheric processes. The precipitate may be a mixture of rain and snow, and is treated in diagnostic form, i.e. its time derivative has been neglected.
Principal reference: Rasch, P. J., and J. E. Kristjánsson, A comparison of the CCM3 model climate using diagnosed and predicted condensate parameterizations, J. Climate, 11, 1587--1614, 1998.

Zhang, M., et al. A modified formulation of fractional stratiform condensation rate in the NCAR community atmospheric model CAM2, J. Geophys. Res., 108 (D1), 2003.
Description of boundary layer scheme: In CAM3.0 a non-local boundary layer scheme is used. The turbulence parameterization includes computation of diffusivities for the free atmosphere, based on the gradient Richardson number, and an explicit, non-local Atmospheric Boundary Layer (ABL) parameterization. The ABL parameterization includes a determination of the boundary layer depth. In practice, the free atmosphere diffusivities are calculated first at all levels. The ABL scheme then determines the ABL depth and diffusivities and replaces the free atmosphere values for all levels within the ABL, returning both the updated diffusivities and the non-local transport terms.
Principal reference: Holtslag, A. A. M., and B. A. Boville, Local versus nonlocal boundary-layer diffusion in a global climate model, J. Climate, 6, 1825-1842, 1993.

Boville, B.A. and C.S. Bretherton, Heating and dissipation in the NCAR community atmosphere model, J. Climate, 16, 3877-3887, 2003.
Description of land surface scheme: Sub-grid scale surface type heterogeneity is represented in CLM3 through satellite-derived fractional coverage of lakes, wetland, bare soil, glacier, and vegetation consisting of up to four plant functional types in each grid box. Fluxes of energy and moisture are modeled independently for each surface type and aggregated before being passed to the atmosphere model. The four plant functional types share a single soil column, with 10 soil layers extending to 3.43m
depth. Soil moisture heterogeneity is simply represented through differing runoff formulations for the saturated and unsaturated fractions of the soil column, which are dynamically defined according to water table depth.
Updates to CLM3.0 hydrology improve partitioning of evapotranspiration into its components and generally lead to moister soils.
Principal reference: Oleson, K.W., Y. Dai, G. B. Bonan, M. Bosilovich, R. Dickinson, P. Dirmeyer, F. Hoffman, P. Houser, S. Levis, G.-Y. Niu, P. Thornton, M. Vertenstein, Z.-L. Yang, and X. Zeng, 2004: Technical description of the Community Land Model (CLM). Technical Report NCAR/TN-461+STR, National Center for Atmospheric Research, Boulder, CO. 80307-3000, 174 pp.

Lawrence, D.M., Thornton, P.E., Oleson, K.W., and Bonan, G.B., 2006: The partitioning of evapotranspiration into transpiration, soil evaporation, and canopy evaporation in a GCM: Impacts on land-atmosphere interaction. Submitted to J. Hydromet.

Boundary Conditions (NAMAP2 specification, if applicable)
Used Xie (2005) SST fields? (Xie 2005 analyses): No
If not, specify SST boundary condition:Hadley Centre observed SST dataset
Frequency of observed SST updates:Updated daily based on linear interpolation between mid-monthly observed Hadley Centre SSTs.
Used CDAS2 analysis for lateral boundary conditions? (if regional model): (NOAA CDAS2)No
If other boundary conditions, please specify: 

Model Output (NAMAP2 specification, if applicable)
Description of output format for spatial fields: (Preferred format)netCDF files containing 3-hourly-average gridded values of lat-lon fields over the domain of interest.
Description of output format for MOLTS time series:(Preferred format)netCDF files containing 48 data points per day (timestep data) of surface fluxes, humidity, T, u, v, w, convective and total precipitation, and radiation variables for the sounding sites (nearest gridpoint).
Estimated total size in Gigabytes of model output: