ADAM Serial Interface Card
S1 Jumpers (Ironics Serial Card to Interface)
| Pin
| Row A RS232
| Row C RS422
|
| 1
| RX to Ironics
| RX to Ironics
|
| 2
| TX from Ironics
| TX from Ironics
|
| 3
| CTS to Ironics
| CTS to Ironics
|
| 4
| RTS from Ironics
| RTS from Ironics
|
| 5
| DCD to Ironics
|
|
| 6
| DTR from Ironics
|
|
S2 Jumpers (Interface to Sensor Port)
| Pin
| Row A RS232
| Row C RS422
|
| 1
| DTR to sensor (also need W4)
| -RXD from sensor
|
| 2
| GND
| +RXD from sensor
|
| 3
| RX from sensor
| -CTS from sensor
|
| 4
| RTS to sensor (also need W3)
| +CTS from sensor
|
| 5
|
| +TXD to sensor
|
| 6
| DCD from sensor (also see W2)
| -TXD to sensor
|
| 7
| CTS from sensor (also see W1)
| +RTS to sensor
|
| 8
| TX to sensor
| -RTS to sensor
|
W1, RS232 CTS
Jumper 2-1: CTS held +12V, not connected to sensor
Jumper 2-3: CTS from sensor
W2, RS232 DCD
Jumper 2-1: DCD held +12V, not connected to sensor
Jumper 2-3: DCD from sensor
W3, RS232 RTS
Installed: RTS to sensor
W4, RS232 DTR
Installed: DTR to sensor
W5, DCD from sensor test point
W6, TX to sensor test point