This is the first run since moving to the Win7 machine and replacing the 
eight relay board with a breadboarded hexfet and current sense amplifier.
Watchdog circuitry is planned for, but currently bypassed. Honeywell flow
meter is incorporated into the board as well and is connected and installed
at the outlet of the flowmeter. This data gets written into the data file after both cylinder ID's.

Started a run of N2 with 1/30/0/<60 valve timing.

2nd run started at 13:06.

Switched to CB10128 at 14:06, but forgot to open cylinder valve so no flow. 

Another (fruitless) loop at 15:06.

Messed with Manual mode valve switching after this run to investigate flow issues. Started one last N2 loop at 16:00.

Scaling for conversion from Meeco V to ppm H2O needs work. 

140501a is the raw file as created in VB
140501b is the file modified to include MFM data as the last column
140501c is the file modified to run with the current calfac_h2o.r