Yesterday, replaced 3-way valve on inlet to Meeco with 4-way plus 2-way valve on vent port of 4-way

Today, start with N2 loop, 1/30/0/<60 at 9:48

Start CB10128 (Slated to be O2 Secondary, diptubed and evac'd, then filled to
200 psi with TRANSFAC) but forgot to open ball valve, so flow went to zero
Open ball valve and restart at 10:42
Another loop at 11:46
Back to N2, loop started at 12:55
Switched to CB10260 to recheck, purged 4 times through 4-way vent
Start CB10260 loop at 13:53
Another loop at 15:19
N2 loop started at 16:10
Time	Meeco	.vbp
11:18	0.3	0.050
11:46	0.1	-0.297
12:06	0.7	0.352
12:48	0.1	-0.058
13:17	0.8	0.485
13:31	0.3	-0.155
13:53	0.1	-0.211
14:05	2.3	2.024
14:34	0.4	0.081
14:40	0.3	-0.053
15:19	0.1	-0.256
15:39	2.3	2.006
15:51	1.6	1.302	
15:54	0.7	0.234
16:03	0.3	-0.065
16:14	0.6	0.209
16:16	0.8	0.520
16:19	0.9	0.452 - 0.664
16:22	1.0	0.474 - 0.631