USE DATA FROM PERIOD:
258.086 367.000

CYLINDER POSITIONS (UNKNOWN=0, CO2 AND O2 KNOWN=1, CO2 ONLY KNOWN=2, DO NOT USE=8, EMPTY=9):
1 0
2 9
3 0
4 0
5 2
6 9
7 9
8 2
9 9
10 9
11 9
12 2
13 9

NOTES:

Unknowns
Pos  ID  Description
1   CA07280   CO2 Secondary
3   EN4329   SCARGO HS3
4   EN4330   SCARGO LS3

Knowns
Pos  ID  SIOCO2  GMDCO2  SIOO2  Description
5   CC339490   451.644   450.38   NA   CO2/CH4/CO Primary High
8   CC339495   410.036   409.83   NA   CO2/CH4/CO Primary Amb
12   CB08905   403.974   403.89   NA   CO2/CH4/CO Primary Low

Working Tank ND12480

- Run of two SCARGO cylinders against 3 WMO primaries on Picarro2, connecting downstream of Siemens
- Added a CO2 secondary to assess slope versus absolute offset (treat as unknown for now)
- Picarro data is on Picarro2 en route to CHC - will need to get and process later
- Need to edit so that CA07280 run is not used to define secondary concentration (use as a known instead?)
-- using as unknown results in -0.5 ppm bias extrapolating 30 ppm
-- bias only in GMD CO2, not SIO CO2? What gives?
-- check if using as a known alters SCARGO CO2, CH4, or CO results