USE DATA FROM PERIOD:
351.545 367.000

CYLINDER POSITIONS (UNKNOWN=0, CO2 AND O2 KNOWN=1, CO2 ONLY KNOWN=2, DO NOT USE=8, EMPTY=9):
1 0
2 0
3 1
4 0
5 1
6 0
7 1
8 1
9 0
10 1
11 0
12 1
13 9

NOTES:

Unknowns
Pos  ID  Description
1   CC129281   2019 O2 Secondary
2   CA07280   CO2 Secondary
4   CC339490   CH4/CO High Primary
6   CB08905   CH4/CO Low Primary
9   CC339495   CH4/CO Mid Primary
11   CC129271   2019 O2 Secondary

Knowns
Pos  ID  SIOCO2  GMDCO2  SIOO2  Description
3   ND19517   460.375   460.074666666667   -710.0175   O2 Primary
5   ND19681   390.3825   390.29475   -367.8   O2 Primary
7   ND20050   333.3565   333.40225   -42.715   O2 Primary
8   ND19273   415.053   414.890666666667   -514.9325   O2 Primary
10   ND19529   504.5085   503.86875   -924.575   O2 Primary
12   ND20887   364.405   364.397   -195.3   O2 Primary

Working Tank ND12480

- Second test of Picarro, now on from Siemens line (includes drying and Siemens, still no VUV), with 5 min jogs (lnjog=150).
- Accidentally left changeover on for most of run. Caused WT flow/P to jump as switching between PaCO2 and ambient.
- 2:44:20 PM, just after switch to Pos 9 (on 2nd up), disabled changeover. (53060 s, 0.6141)
- 4:25:30, turned changeover back on - slight bump up of 0.05? (59130 s, 0.6844)
- Changeover did not seem to affect results
- CH4/CO primaries treated as CO2 and O2 unknowns - try using as CO2 knowns once change to X2019 made?
- Processing both using Picarro in CALFACtest and using Siemens in CALFAC
- Still rolling over - need to do 7.5 min jogs?