| Entry | Date | Title | Site | Author | #Graphics |
|---|---|---|---|---|---|
| 81 | Wed 23-Apr-1997 | An RF primer | 7 | Oncley, Steve | |
| 5 | Wed 02-Apr-1997 | RF modem configuration | base | Maclean, Gordon |
If an ADAM fails to boot at the very first step: "attaching to network..." ...." Timeout " The problem probably is that the "aspppls" process is not running. Search for this process with: "ps -t term/N", where N is 0 for marigold or 1 for cosmos If it isn't there, it will restart if the modem carrier drops and is brought back, which can be accomplished by cycling power to the freewave at the site. (Obviously, this can be done while in the field.)
Here is the initial configuration of 4 Freewaves before they left
for CASES.
##############################################################
cocklebur term/0 marigold port/a
ipdptp0
560-0563 560-0575
master calling 560-0575 slave
Baud: 115200 38400
FreqKey: 11
Max packet: 7
Min packet: 9
Xmit rate 1
RF data rate: 3
RF Xmit power 5 in lab, 9 in field
##############################################################
cocklebur term/1 cosmos port/a
ipdptp1
560-0512 560-0573
master calling 560-0575 slave
Baud: 115200 38400
FreqKey: E
Max packet: 7
Min packet: 9
Xmit rate 1
RF data rate: 3
RF Xmit power 0 in lab, 9 in field